Mylex AcceleRAIDTM 352 PCI to Ultra 160 SCSI RAID Controller AcceleRAID 352 Guía de instalación descargar pdf (Pagina 25)

Installation

Manual No. 775020 2-11

8. Termination – Only Internal or External Devices (Standard)

Check that the drive channel is properly terminated according to

drawings below. The AcceleRAID 150 is equipped with automatic

SCSI termination circuitry which handles automatic enabling and

disabling of on-board termination. For example, if the controller is at

the end of the SCSI bus, it automatically enables on-board termination.

If all the SCSI devices on a channel are connected either to the

internal connector or to the external connector, the end of the SCSI

bus farthest from the controller must have a terminator installed; the

controller automatically enables on-board termination. See Figure 2-9

for an example of an internal drive configuration. See Figure 2-10 for

an example of an external drive configuration.

Figure 2-9. Termination with Internal Drive Configuration

Figure 2-10. Termination with External Drive Configuration

Auto Termination

Enabled

Internal Drive

Configuration

Auto Termination

Enabled

External Drive

Configuration

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 101 102

Sin comentarios

Mylex AcceleRAIDTM 352 PCI to Ultra 160 SCSI RAID Controller AcceleRAID 352 Guía de instalación Pagina 25